WAGNER FINECOAT 9900 PLUS Instrucciones De Uso página 5

FC9900 Plus
2
INTRODUCTION
This High Volume/Low Pressure (HVLP) spray system is designed
for applying coatings to surfaces that can be sprayed faster
than brushing or rolling and are too small for traditional airless
sprayers. Components of this system include a power switch, a
power cord, a filter warning light, a circuit breaker switch, a dual
filtration system, a cup holder, an air hose, and an air outlet.
The turbine is also equipped with a tool box. It is located on the
reverse side of the turbine and can be used to store projector
sets or any other small spare parts.
1
2
3
1. Circuit breaker switch
2. Filter warning light
3. Filter
4. Air inlet
5. Cup holder
6. Filter (in the end of can)
7. Power switch
8. Air outlet
* Air hose not pictured.
With this HVLP spray system, you can achieve the highest
quality professional finish possible with little or no preparation
or setup time. Please review all the information contained in
this manual before operating the system.
2.1
TECHNICAL DATA
Voltage
Power consumption P1
Max. current comsumption
100-110V~
220V-240V~
Max. air ram pressure
Rpm
Turbine weight
Mains cable
Container capacity
4
Air hose
5
Whip hose length
6
Nozzle set (standard)
Max. permissible coating
7
temperature
8
Typical coating flow rate
Max. noise level
turbo-blower
paint spray gun
* Measuring location: 1 m in distance from the unit 1.60 m
above the floor, reverberant floor.
** Measuring location: 2.5 m distance from the unit 1.60 m
above the floor.
INTRODUCTION
100-110V~, 50/60 Hz or
220V-240V~, 50/60 Hz
1836 W
13,4A
9,0A
0,72 bar (10,5 psi)
21 000 rpm
15 kg
3 m
1 liter
9,1 m
1,5 m
No. 4 (1.8 mm)
43ºC
0,35 l/min
75 dB (A) *
76 dB (A)
5