Publicidad
Idiomas disponibles
Idiomas disponibles
WIRING
WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires
from the fan. If your house wire is larger than 12-gauge or there is more than one house wire to
connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure outlet box is properly grounded and a ground (green or bare) wire is present.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
NOTE: This fan is remote control adaptable (remote control not included). If you choose to
purchase a remote control for use with the fan, be advised that the dimming function for the light
will not be operable. Dimming capability for this light is only possible by using wall controls that
control the fan and light separately, such as the WM-7WWL (not included).
1.
Choose wiring diagram (Fig. 1A, Fig. 1B or
Fig. 1C) that fits your situation and make
appropriate wiring connections as follows:
[IMPORTANT: For each wire connection
below, use one of the wire connectors (AA),
making sure to screw wire connector (AA)
on in a clockwise direction.]
1A. FAN AND LIGHT CONTROLLED BY
PULL CHAINS: Connect BLACK and BLUE
wire from fan to BLACK wire from ceiling.
Connect WHITE wire from fan to WHITE
wire from ceiling. Connect all GROUND
(GREEN) wires together from fan (on
downrod (D) and mounting bracket (A)) to
BARE/GREEN wire from ceiling.
1B. FAN CONTROLLED BY PULL CHAIN,
LIGHT BY WALL SWITCH: If you intend to
control the fan light with a separate wall
switch, connect BLACK wire from fan to
BLACK wire from ceiling. Connect BLUE
wire from fan to the BLACK wire from the
independent wall switch for the light. Connect
WHITE wire from fan to WHITE wire from
ceiling. Connect all GROUND (GREEN)
wires together from fan (on downrod (D) and
mounting bracket (A)) to BARE/GREEN wire
from ceiling.
FAN AND LIGHT CONTROLLED BY PULL CHAINS
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
1A
120V POWER
FROM CEILING
GROUND/GREEN (BARE)
GREEN
FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
1B
120V POWER
FROM CEILING
GROUND/GREEN (BARE)
GREEN
10
BLACK (POWER)
WHITE (NEUTRAL)
WHITE
BLACK (POWER)
BLACK
WHITE (NEUTRAL)
(WALL
SWITCH)
WHITE
BLACK
BLUE &
BLACK
BLACK
BLACK
BLUE
Publicidad
