Narex EVP 13 G-2H3 Instrucciones De Uso Originales página 12

English
Table of contents
Description of the device ..........................................................................12
Technical Specification ..............................................................................12
General Power Tool Safety Warnings ......................................................12
Special Safety Instructions .......................................................................13
Information about noise level and vibrations .......................................13
Double insulation ......................................................................................13
Use ................................................................................................................13
Commissioning and use............................................................................13
Work instructions .......................................................................................14
Maintenance and service ..........................................................................14
Storage ........................................................................................................14
Environmental protection ........................................................................14
Warranty .....................................................................................................15
Certificate of Conformity ..........................................................................15
Technical Specification
Model
Supply voltage (V)
Mains frequency (Hz)
Power input (W)
Speed under load (rpm)
1st speed gear
2nd speed gear
Idle speed (rpm)
1st speed gear
2nd speed gear
Number of impacts (ipm)
1st speed gear
2nd speed gear
Speed pre-selection
Right-left turning
Extent of chuck dia. (mm)
Thread on spindle
Quick-tightening chuck Auto-Lock
Drilling dia. max (mm)
into steel
into aluminium
into wood
into concrete
Clamping neck dia. (mm)
Weight without tool (mm)
Class of protection
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference!
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as
12
Impact drill EVP 13 G-2H3, EVP 13 G-2A
Original operating manual (EN)
EVP 13 G-2H3
230–240
50–60
760
0–600
0–1 750
0–1 100
0–3 050
0–22 000
0–61 000
ü
ü
1.5–13
1/2"-20 UNF
û
13
20
45
20
43
2.5
II /
Description of the device
1a ......Chuck with ring gear
1b .....Quick-tightening chuck Auto-Lock
2 ........Spots on spindle
3 ........Clamping neck
4 ........Lever for impact shifting
5 ........Air vents
6 ........Latching pin
7 ........Switch / controller
8 ........Speed pre-selection wheel
9 ........Alteration switch lever
10 ......Gear-shifting lever
11 ......Additional handle
12 ......Stop bar
13 ......Chuck hook
14 ......Spanner*
15 ......Socket screw wrench*
*) Depicted or displayed accessories need not necessarily become
the integral part of delivery.
EVP 13 G-2A
230–240
50–60
760
0–600
0–1 750
0–1 100
0–3 050
0–22 000
0–61 000
ü
ü
1.5–13
1/2"-20 UNF
ü
13
20
45
20
43
2.6
II /
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (ground-
ed) power tools. Unmodified plugs and matching outlets will re-
duce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water en-
tering a power tool will increase the risk of electric shock.