Pahlen Jet Swim Athlete Manual De Instrucciones página 18

ENGLISH
Jet Swim Athlete
Starting
The pump housing must be water-filled before starting.
Never run the pump dry as this may damage the components.
1. Start by pressing the start button (A) in the front, see Figure 3.
2. The jet is turned off with button A.
Note
In case of freezing risk: Lower the water level to about 10 cm below the Jet Swim Athlete's enclosure to avoid freezing damage.
Release the plug on the back and drain any water. Drain the pump as well. The pump must be stored in a protected place
(indoors).
On restart: first check the condition of the hoses.
18