MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following chart provides the scheduled maintenance. The intervals shown may vary according to particular working
conditions, which are to be defined by the person in charge of the maintenance.
WARNING!
Maintenance operations must be carried out with the machine off (ignition key removed).
Moreover, read carefully the instructions in the Safety chapter before performing any maintenance
operation.
All scheduled or extraordinary maintenance operations must be performed by qualified personnel, or by an authorized Service
Center.
This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenance
procedures.
For other maintenance procedures contained in the Scheduled Maintenance Table or for extraordinary maintenance operations
see the specific Service Manual that can be consulted at any Service Center.
SCHEDULED MAINTENANCE TABLE
Maintenance
Engine oil level check
Engine air cleaner cleaning
Engine radiator fin cleaning check
Engine coolant level check
Battery fluid level check
Hydraulic system oil level and drain
filter efficiency check
Hydraulic system oil cooler fin
check and cleaning
Hopper, filter and suction pipe
cleaning, gasket check and fan
bearing lubrication
Water nozzle and filter cleaning
Brake fluid level check
Reverse gear buzzer operation
check
Diesel engine start-up safety
system check
Tire pressure check
Suction inlet and skirt height and
operation check
Side broom position check and
adjustment
Engine oil replacement
Dust control system water filter
cleaning
Parking brake check
Alternator belt tension check
Climate control system compressor
belt tension check
Diesel engine oil filter replacement
33015122(1)2006-02
Running-in
Every 10
period (after
hours or
the first 50
before use
hours)
INSTRUCTIONS FOR USE
Every 200
Every 600
Every 1,200
hours
hours
(6)
(7)(8)
(7)
(6)
(7)(8)
Every 2,400
hours
hours
periods
Long
19