Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk-Advance RS 500 Instrucciones De Uso

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

This manual is an integral part of the machine; its purpose is
to provide the operator with all necessary information to use
the machine properly in a safe and autonomous way. It
contains information about technical data, safety, operation,
storage, maintenance, spare parts and disposal.
Before carrying out any procedure on the machine, the
operators and qualified technicians must read this manual
carefully. Contact Nilfisk-Advance in case of doubts
concerning the interpretation of the instructions and for any
further information.

TARGET

This Instructions for Use Manual is intended for operators and
technicians qualified to perform the machine operation and/or
maintenance.
The operators must not carry out operations reserved for
qualified technicians. Nilfisk-Advance will not be responsible
for damages coming from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The Instructions for Use Manual must be kept inside the
machine cab, far from liquids and other substances that can
cause damage to it.

IDENTIFICATION DATA

The machine serial number and model are shown on the plate
(21, Fig. E) affixed inside the cab.
The machine serial number is also printed on the machine
side (23, Fig. G).
The diesel engine serial number and model are marked in the
positions shown in the relevant Manual; in some countries, a
plate showing the same data is provided in the position (31,
Fig. G).
This information is useful when ordering machine and diesel
engine spare parts. Use the following table to write down the
machine and diesel engine identification data for any further
reference.
MACHINE model ...........................................................
MACHINE serial number ...............................................
ENGINE model ..............................................................
ENGINE serial number ..................................................
33015122(1)2006-02
INSTRUCTIONS FOR USE

OTHER REFERENCE MANUALS

The sweeper is also supplied with the following manuals:
– Diesel engine Manual, to be considered as integral part
of this Manual.
– Sweeper Spare Parts List
At Nilfisk-Advance Service Centers the following Manual is
also available:
– Sweeper Service Manual

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures
must be carried out by qualified personnel or by
Nilfisk-Advance Service Centers. Only original spare parts
and accessories must be used.
Call Nilfisk-Advance for service or to order spare parts and
accessories, specifying the machine model and serial
number.

CHANGES AND IMPROVEMENTS

Nilfisk-Advance constantly improves its products and
reserves the right to make changes and improvements at its
discretion without being obliged to apply such benefits to the
machines that were previously sold.
Any change and/or addition of accessory must be approved
and performed by Nilfisk-Advance.
3