Mx Onda MX-PIP2199 Manual De Instrucciones página 81

Detection of the container
The plate has a minimum detection limit of the cooking zone and is 12 cm. For
this reason, you should refrain from using containers whose base is less than
12 cm in diameter. If you turn the plate without any container with a container
whose base is less than 12 cm or unfit for induction container, the plate will not
work in the display " E0 " will appear, notify acoustically and after 50 seconds will
turn off automatically.
fans
In the base plate there are two fans which aims to maintain a stable
temperature inside the induction plate.
Each time the board goes on and the power or temperature setting, fans will
also be put into operation. When the plate is turned off, the fans remain in
operation and will shut off automatically after 3 minutes.
At the base of the plate should NEVER put tea towels, dishcloths or other
objects that may obstruct the holes in the fan, thus preventing proper
ventilation and cause overheating of the circuits, so act security protections.
Note:
Remember that the fans remain in operation for 3 minutes after turning off
the plate. This is normal and does not indicate a malfunction.
INSTALLATION
1. Place the plate on a stable, level surface, away from hot areas with high
humidity or near flammable materials (oil, curtains, cloths, etc.).
2. To ensure adequate ventilation allow at least 30 cm on each side of the
plate. DO NOT obstruct the ventilation slots on both sides and in the back
of the plate and how the holes in the fan (located at the base of the plate).
3. Fully unroll the cord and plug the appliance plug into the mains. The buzzer
will "beep" to warn that the board has been plugged into the power outlet.
7