Publicidad
Idiomas disponibles
Idiomas disponibles
14
Daily use
Select the DELAY START (button 8)
Before you start the programme, if you wish to delay the start, press the button repeated-
ly, to select the desired delay.
The corresponding symbol will appear on the display. The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours
by means of this button.
The selected delay time value will appear on the display for about 3 seconds, then the dura-
tion of the programme will appear again.
You must select this option after you have set the programme and before you press the
button 7.
You can modify or cancel the delay time at any moment, before you press the button 7.
The door will be locked throughout the delay time. If you wish to add laundry in the ma-
chine during the delay time, press the button 7 to set the machine to pause. When the Door
symbol disappears, the door can be opened. Add the laundry, close the door and press the
button 7 again.
Selecting the delayed start.
• Select the programme and the required options.
• Select the delay start.
• Press button 7: the appliance starts its hourly countdown. The programme will start after
the selected delay has expired.
Cancelling the delayed start
• Set the washing machine to PAUSE by pressing the button 7;
• Press button 8until the symbol
• Press the button 7 again to start the programme.
The selected delay can be changed only after selecting the washing programme again.
The Delay Start can not be selected with Drain programme.
Altering an option or a running programme
It is possible to change some options before the programme carries them out. Before you
make any change, you must pause the washing machine by pressing the button 7.
Changing a running programme is possible only by resetting it. Turn the programme selec-
tor dial to
pressing the 7 button again. The washing water in the tub will not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme which is running, the corresponding light
starts blinking. Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
new programme.
and then to the new programme position. Start the new programme by
to cancel a programme which is running. Now you can select a
' is displayed;
Publicidad
