Publicidad
Idiomas disponibles
Idiomas disponibles
26
Care and cleaning
11. Replace the filter into the pump by in-
serting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
12. Refit the flap and close the pump door.
WARNING!
When the appliance is in use and depending on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash cycle, always wait until the appliance has fin-
ished the cycle, and is empty. When refitting the pump cover, ensure it is securely re-tight-
ened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filters
If the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks
yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..."
for more details), check if the water inlet filters are blocked .
To clean the water inlet filters:
1.
Turn off the water tap.
2.
Unscrew the hose from the tap.
3.
Clean the filter in the hose with a stiff
brush.
4.
Screw the hose back onto the tap. Make
sure the connection is tight.
5.
Unscrew the hose from the machine.
Keep a towel nearby because some wa-
ter may flow.
6.
Clean the filter in the valve with a stiff
brush or with the piece of cloth.
Publicidad
