Tesmed Trio 6.5 Manual De Instrucciones página 117

6.9 Charging
Any mode, if you connect the micro USB cables to charging, the LCD will be showing the charging
process icon as follows:
Caution:
1. In first use, please run out of battery power, then charging 12 hours.
2. If not use the product for a long time, sometimes can't switch on the device is normal,
because the battery has run out. If you connected the charger, the interface will show the
icon as picture of 6.6,that means the device is good, just don't have power.
3. If not use the product more than 6 months, please charge and discharge the device once a
month at least to maintain the battery life.
4. Do not use the device during charging.
5. In order to ensure the product safety, please choose the charger approved by IEC60601-1
and IEC60601-1-2 or have UL MARK or GS certification.
6.10 Power saving function
If no button press within 3min. at wait mode, the device will be auto. into power saving mode.
6.11 Use of electrode
1. The electrode may only be connection with the New Stimu device. Make sure that the de-
vice is turned off when attaching or removing the adhesive electrode.
2. If you want to reposition the electrode during the application, turn the device off first.
3. The use of electrode may lead to skin irritations. If you experience such skin irritations, e.g.
redness, blistering or itching, discontinue using the adhesive electrode. Do not use the New
Trio 6.5
Stimu device permanently on the same body part, as this may also lead to skin irritations.
4. Electrode is personal belongings, just for single person use. Please note that prevent cross
17
Tesmed copyright - it is absolutely forbidden the partial or total reproduction of any present content
Trio 6.5
117