Descargar Imprimir esta página

Verdemax SE20 Manual De Usuario página 34

Motosierra a batería 20v

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Releasing the chain brake (Fig.12)
• Draw the hand guard in the direction of the
bow-type handle.
Checking the chain brake
• Set the chainsaw down on a firm surface.
• Release the chain brake.
• Hold the chainsaw tight in both hands.
• Switch the chainsaw on. The chainsaw starts
running.
• Tilt the hand guard in the direction of the
guide bar tip. The chain must come to an
immediate standstill! If not, do not use the
chainsaw and have it repaired by a quali-
fied specialist or a specialist workshop.
• After work, regularly clean the visible mecha-
nisms of the chain brake to remove chips and
sawing residues.
Chain lubrication
CAUTION! The device must only be op-
erated with sufficient chain lubricating oil.
Insufficient lubrication reduces the service life
of the device.
• Check the oil level on the basis of the oil level
indicator.
Refilling the chain oil
CAUTION!
• Only add environmentally friendly, good
quality chain lubricating oil to the chain saw.
• Do not add used oil. Used oil can cause skin
cancer with extended and repeated skin con-
tact, and is damaging to the environment!
Used oil does not have the necessary lubri-
cating characteristics and is unsuitable for
chain lubrication.
• An oil other than the recommended oil can
cause damage to the rail, chain and lubrica-
Original instructions
EN
tion system.
• Make sure that no dirt gets into the oil tank.
• Avoid oil spillages. Always wipe up spilled
oil. (Fig.13)
• Check the oil level indicator (b) to make sure
sufficient chain oil is available for lubrica-
tion.
• Unscrew the oil tank cap (a). Before open-
ing, clean the tank cover and filling nozzle if
necessary.
• Carefully add the chain lubricating oil until it
reaches the top mark on the oil level indica-
tor (b).
Checking the chain lubrication
• Start the device (see section "Switching on
and off").
• Hold the running saw chain approx. 15 cm
above a suitable surface for a short time. With
sufficient chain lubrication, a light track will
appear due to the oil sprayed from the saw
chain.
34

Publicidad

loading

Productos relacionados para Verdemax SE20

Este manual también es adecuado para:

4349