Verdemax SE20 Manual De Usuario página 36

OPERATION
ATTENTION! Do not operate the
chainsaw with a defective or badly worn
cutting device.
WARNING! Familiarize yourself with the
chainsaw sawing technique in detail
before use (see "Basic working technique").
Risk of injury! Never allow children to oper-
ate the chainsaw. Do not allow persons to use
the chainsaw, if they have not read the oper-
ating manual or received appropriate instruc-
tions for the safe and correct use of the
chainsaw. We recommend attending a suitable
training course. The information provided here
is for supplementary purposes only!
Before every use
• Check all parts are secure and inspect for
visible defects.
• Check the device for correct chain tension.
• Test the function of the chain brake.
• Check chain lubrication.
• Check for any leaks.
Holding the device correctly
Risk of injury!
• Never work on unstable ground!
• Never work above shoulder height!
• Never work when standing on ladders!
• Do not bend too far when working!
• Only use the device when the weather and
terrain conditions are favourable!
• Stands with both legs firmly on the grounds.
• Be aware of obstacles in the working area.
• During work, always hold the device tight in
both hands!
How to saw correctly!
• Scan the working area and remove any in-
terfering objects.
• At the start of work, check that the device is
safe.
• Hold the device in both hands as prescribed.
• Switch on the chainsaw before applying it to
the cut.
• Exert regular pressure on the device and do
Original instructions
EN
not apply excessive force.
• If possible, apply the device to the branch
you wish to saw with the claw stop.
ATTENTION!
If the cutting device touches a foreign body, or
the
operation noise intensifies, or the device vibrates
unusually heavily, switch off the motor and al-
low the device to come to a halt.
Remove the battery and implement the follow-
ing measures:
• check for damage
• check for loose parts and fasten all parts
• replace damaged parts with equivalent parts
or have them repaired.
AFTER USE
Risk of injury!
Always switch off the device before setting the
device down. The saw chain will run on for a
short time after stop the motor, wait until all
moving parts have come to a complete stand-
still, remove battery,place the protective sheath
on the cutting unit,apply chain brake,leave the
device to cool down.
NOTE: After use, the battery tempera-
ture might be high, and the battery
would be over-temperature protected, allow
the battery cool down for half an hour and it
would recovery function.
Basic working technique
Risk of injury!: This section examines the
basic working technique for using the
device. The information provided here does
not replace the many years of training and
experience of a specialist. Avoid any work that
you are not adequately qualified for! Care-
less use of the device can lead to serious inju-
ries and even death!
36