Verdemax SE20 Manual De Usuario página 40

TROUBLESHOOTING GUIDE
Fault
The equipment does not
work
Equipment operates
intermittently
Saw chain is dry
Chain/guide bar is hot
Chainsaw judders, vibrates
or does not saw properly
Original instructions
EN
Possible cause
Battery empty
Battery is not correctly
inserted
Loose connection (external)
Loose connection (internal)
ON/OFF switch defective
No oil in the tank
Vent in the oil tank cap is
blocked
Oil outlet is blocked
No oil in the tank
Vent in the oil tank cap is
blocked
Oil outlet is blocked
Chain is blunt
Chain is over tensioned
Chain is under tensioned
Chain is blunt
Chain is worn
Saw teeth point in the
wrong direction
40
Remedy
Charge battery
Remove battery and insert
again
Consult a pecialist work-
shop
Top up with oil
Clean the oil tank cap
Clear the oil outlet
Top up with oil
Clean the oil tank cap
Clear the oil outlet
Re-sharpen or replace
the chain
Check the chain tension
Adjust the chain tension
Re-sharpen or replace
the chain
Replace the chain
Refit the chain with the teeth
facing in the correct direction