11. Maintenance and care
11.1 Power adapter care
WARNING
If the power adapter outer casings become loose or are separating,
stop use and contact Medela immediately. Separation of the casing can
result in electric shock.
To keep your power adapter and cable in
good working condition, pay attention to the
following: Do not unplug the cable or the
power adapter by pulling on the cord, but hold
it by the connector housing and adapter body.
Traveling internationally
Information
When traveling internationally, we recommend purchasing a travel
adapter (not included) to match the corresponding wall outlet. Please
consult with the country you are visiting to find out what type of adapter
will work best. The power adapter of the breast pump is two-pronged
and does not require a grounded outlet. This breast pump has a
lithium-ion battery.
Information
Carrying such batteries on airplanes may be restricted by the country
you are visiting. Please consult with the country you are visiting to find out
if there are any restrictions that pertain to traveling with lithium-ion
batteries.
11.2 Battery maintenance
Your breast pump contains a built-in (not replaceable) lithium-ion
rechargeable battery.
NOTICE
NOTICE
• In case of a completely discharged battery the breast pump cannot be
used instantly after connecting it to the power adapter. Allow the
battery to be charged for at least 15 minutes before attempting to
switch the pump on.
• For optimum pump and battery performance use the power adapter
that comes with the breast pump (Model MS-V2000U050-010B0-*).
• Make sure that the voltage of the power adapter is compatible with
the power source.
• Be aware of the risk of USB-C-socket of the pump or battery being
shortcircuited by metal objects or fluids.
*country code
Information
To preserve the battery life cycle:
• Keep your breast pump in a cool place.
• Recharge the battery before it completely drains. This is better for the
life cycle of the battery
• Fully charge the battery before storing your breast pump. Refer to
chapter 8.2 for information on the battery charging state.
• If your breast pump has been stored in a hot location, it may not run on
battery power right away. To resume normal battery function, allow
the breast pump to cool down for one hour. During this time, you can
power your breast pump with the power adapter plugged into a wall
outlet.
11.3 Long-term storage
Your breast pump contains a rechargeable battery. To preserve your
breast pump, when not in use for an extended amount of time, it will
automatically transition into storage mode. To remove from storage
mode, plug your breast pump into an external power source and charge
the battery for two hours. Do not store the collection cup in assembled
state over an extended period of time.
Before storing your breast pump for an extended amount of time
remember to:
16