Descargar Imprimir esta página

BGS technic 9069 Manual De Instrucciones página 4

Comprobador de bomba de vacío y combustible

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CONTENTS
1
Dial gauge
2
Hose line
3
Screw adapters (x3)
4
Hose adapters (x2)
5
Cone adapters (x2)
INTENDED USE
This set is used to checking leaks on e.g. fuel lines, throttle, intake manifold and intake or exhaust
valves.
IMPORTANT
Read these instructions carefully. Note the safe operational requirements, warnings and cautions.
Use the tool correctly and with care for the purpose for which it is intended. Failure to do so may
cause damage and/or personal injury and will invalidate the warranty. Please keep instructions safe
for future use.
SAFETY ADVICE
Observe standard workshop safety procedures when using the test gauge.
Wear safety eye protection and protective clothing. Avoid touching eyes while working with
petrol.
Have fresh water and soap nearby in case petrol contacts skin, clothing or eyes.
Remove loose personal items such as rings, bracelets, necklaces, ties and contain long hair.
Ensure hands, clothing are clear of fan blades and other moving or hot parts of engine.
Keep the work area clean and uncluttered and ensure there is adequate lighting.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and unauthorized persons away from the working area.
Ensure that connections for testing the fuel pump are secure and free from leaks.
WARNING! DO NOT use test gauge on any vehicles other than those with carburetor fuel
systems.
DO NOT smoke or allow a spark or flame in and around the vehicle.
DO NOT dismantle the test gauge. The test gauge must be checked by qualified service
personnel only.
DO NOT get tester wet or use in damp or wet locations or areas where there is condensation.
DO NOT use the tester for any purpose other than that for which it is designed.
DO NOT operate the tester if damaged.
When not in use store tester in a safe, dry, childproof location.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Vacuum & Fuel Pump Tester
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9069
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading