LAVAZZA LM 840 Tiny Eco Instrucciones De Uso página 30

EN I T
Press SWITCH-ON/STAND-BY/SUPPLY button
and deliver one cupful of descaling solution
(approx. 2.1fl oz/60 ml), then wait approximately 15-20
seconds to allow the descaling solution to work properly.
During breaks, empty the container used to collect the
solution. The solution must be emptied into the wash-
basin together with cold water.
Repeat the steps described in points
the water tank is completely empty.
Proceed with the rinsing cycle.
MAINTENANCE AND CLEANING
and until
30
Rinsing cycle
Remove the tank, and rinse it with fresh drinking water.
Fill the tank to MAX level with fresh drinking water
and place back onto the machine.
Place a suitable container under the spout.
Press the SWITCH-ON/STAND-BY/SUPPLY but-
ton then supply the full content of the tank.
Empty the container and place it again under the dis-
penser.
Rinsing is complete after emptying the water tank 5
times.
After emptying the water tank for the fifth time, wipe
the machine clean using a dampened soft cloth.
After cleaning the machine, the descaling process will
be over.