Nilfisk SC370 43B Manual De Servicio página 20

Service Manual- SC370
Control Board (EB2)
Removal
1. Push the machine to a level floor.
2. Ensure that the machine is off.
3. Ensure the recovery tank is empty.
4. Remove the recovery tank assembly.
5. Disconnect the battery connector connected to the machine (Figure 6).
6. Remove 7 screws, take out the distribution box (Figure 13).
7. Remove 2 screws, then remove the cover of distribution box (Figure 14).
8. Disconnect all harnesses connected to the Control board (Figure 15).
9. Remove 4 screws fixing the Control board and take it out (Figure 16).
Installation
Assemble components in reverse order of disassembly.
Remove 7 screws
Figure 13
Disconnect the harnesses
Figure 15
Distribution box
Remove 2 screws
Figure 14
Remove 4 screws
Figure 16
04 Control system 19