EdilKamin PELLKAMIN 10 Instalación Uso Y Mantenimiento página 49

OPTIONAL BASE
Place the bottom of the base (1 - Fig. 25) in the selected posi-
tion.
Provide a power outlet on the back of the insert, so that it is
accessible once installation is complete.
Secure the lower part of the base to the fl oor with 8-mm diam-
eter steel anchors in order to prevent it from tipping over.
Place the top of the base (2 - Fig. 25), adjusting it to the desired
height using the bolts provided (3 - Fig. 25).
At this point, proceed with the installation on the base, using
the bolts supplied, of the base plate (A - Fig. 26) supplied with
the insert.
Continue with the installation of the insert as shown on page 41
Failure to follow the above instructions can cause the insert
to tip over with possible serious injury to the user.
ONLY after securing the base to the fl oor can the insert be
placed on the base.
INSTALLATION
fi g. 25
fi g. 26
fi g. 27
- 49
-
2
3
A
74 74
1