EN
Short selection
Free selection
Other selections
ENTER‐OK
2. Press
ENTER
3. Skip the query requesting CAR DATA.
4. Select Rec/Recycling phase.
5. Set the Pressure increase Test time to
6. Press
ENTER
7. Deselect Vacuum phase using
8. Press
ENTER
9. Deselect Filling phase using
10. Press
ENTER
11. Select Process start.
12. Press
ENTER
The service hoses will now be drained and the A/C service unit's basic menu will be activated. The compressor
has produced a slight internal vacuum so that the filter can be replaced with minimal refrigerant loss.
13. Switch off the A/C service unit.
14. Pull out the power supply plug.
15.
CAUTION! Health hazard
The following steps may only be performed by authorized personnel. Wear protective gloves and gog
gles.
Unscrew the screw (D) from the holder, and pull the dryer filter straight out.
16. Replace the Orings (E). Moisten new Orings with refrigerant oil before installing.
32
to confirm.
to confirm.
.
No
to confirm.
.
No
to confirm.
to confirm.
.
1