Abus FUBE50000 Manual De Instalación Y Usuario página 39

8. Teach in the wireless control
panel (see chapter "Read-in
process") and lock the cover
in place.
9. Once installation and
commissioning have been
completed, start the
calibration of the chip key
reader manually by
pressing the
keys at the same
time.
The control device must be closed and screwed in at this point,
and positioned in its final installation location.
During the calibration of the chip key reader, the status LEDs for sub-areas
1 to 4 light up one after the other (sequence of lights from top to bottom).
Keep the chip key and any other metal objects away from the chip key
reader during calibration to avoid disrupting the process.
and
Installation and start-up
39