Changing Sensitivity; Connectivity; Using Fm/Roger - Advanced Bionics CI Q30 Guia Del Usuario

To change volume:
Pressing briefly on the top portion of the
volume control will increase the volume.
The volume range available within a program can be changed or disabled by a hearing care
professional in the SoundWave™ fitting software. If there are any questions about the specific
volume range setting, please contact an implant center.
The QuickSync feature allows bilateral wearers to control program
REMEMBER:
and volume in both devices simultaneously by only touching one Naída CI Q30.

Changing Sensitivity

A change in sensitivity adjusts the softest sound that can be picked up by the microphone. Sensitivity
adjustments are either programmed by a hearing care professional in the SoundWave™ fitting
software or through the use of the AB myPilot remote control. If you have any questions about
the specific sensitivity control settings, please contact an implant center. Please see
Sensitivity with the AB myPilot Remote Control

Connectivity

Using FM/Roger

The FM and Roger features help many cochlear implant users, particularly school-aged children,
overcome difficulties hearing a speaker at distance in the presence of noise and reverberation.
The Naída CI Q30 sound processor enables use of wireless FM and Roger systems through
three different modes.
The first way to access FM/Roger is by attaching the FM or Roger receiver directly onto the
ComPilot streamer. The signal is then transmitted wirelessly to the Naída CI Q30. This signal can
be transmitted to one or two Naída CI Q30 processors for bilateral recipients. FM/Roger signals
can also be streamed to a Naída CI Q30 and a Phonak Hearing Instrument simultaneously for
bimodal users.
1
Pressing briefly on the bottom
portion of the volume control will
decrease the volume.
in the AB myPilot User Guide.
Naída CI Q30 Sound Processor User Guide
2
Changing
31