Advanced Bionics CI Q30 Guia Del Usuario página 37

The screen will tell you which devices are paired by showing a green circle with a checkmark
4
in it beside the recipient's initials. Move to highlight the device you would like to un-pair using
the downward arrow. Press the center button once you have highlighted the device.
The green circle with the checkmark will disappear, and the device will be un-paired and
5
will no longer be controlled by the AB myPilot remote.
If you wish to un-pair all devices at
once, from the pairing menu, press the
downward arrow button to highlight the
Clear Pairing option. Press the center
button to select.
Pressing the center button will clear
pairing for all Naída CIs that are paired
to the AB myPilot.
Be advised that placing the AB myPilot within a 0.4 inch (1cm) range
CAUTION:
of the Naída CI Q30 will cause the Naída CI Q30 to lose communication with
accessory devices such as the AB myPilot and/or the ComPilot. At this time,
the AB myPilot will not be able to communicate with the Naída CI Q30. The
Naída CI Q30 will have to be power cycled (restarted by removing and replacing
the power source) in order for the AB myPilot to resume communication with the
sound processor.
The AB myPilot is intended to work at an arm's length from the Naída CI Q30.
36
Naída CI Q30 Sound Processor User Guide
6
8
The device will then ask you to confirm this
command. You can confirm it by selecting
Confirm and pressing the center button.
7