Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature
Controls
Temperature Control ([select models)
Freezer
Refrigerator
Cold
Colder
Cold
Colder
4
is recommended
setting
4
is
recommended
setting
The control is located at the top front of the fresh food compartment.
Initial Control
Settings
After plugging the refrigerator
in, set the controls.
• Pressing the
_v_ or _._ pads adjusts the controls to
the desired setting.
• Set the Freezer control on 4.
• Set the Refrigerator
control on 4.
• Let the refrigerator
run at least 8 to 12 hours before
adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator
cabinet may be
warm to the touch. This is a normal occurrence
that
helps prevent moisture from condensing
on the
cabinet. This condition
will be more noticeable when
you first start the refrigerator,
during hot weather and
after excessive or lengthy door openings.
Adjusting
the Controls
• 24 hours after adding food, you may decide that one
or both compartments
should be colder or warmer. If
so, adjust the control(s)
as indicated
in the
Temperature Control Guide table below.
• Except when starting the refrigerator,
do not change
either control more than one number at a time.
• Allow 24 hours for temperatures
to stabilize.
Temperature
Control Guide
Refrigerator
too warm
Set the Refrigerator
control
Refrigerator
too cold
Freezer too warm
Freezer too cold
Turn refrigerator
OFF
to next higher number by
pressing the
_^_ pad.
Set the Refrigerator
control
to next lower number by
pressing the
_v_ pad.
Set the Freezer control to
next higher number
by
pressing the _
pad.
Set the Freezer control to
next lower number by
pressing the _v_ pad.
Press the Freezer or
Refrigerator
_
pad until
a dash "-" appears in the
display.
12
Publicidad
