Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature
Controls
Temp Alarm
o
The Temp Alarm system will alert you if the
freezer or fresh food temperatures
exceed normal
operating temperatures
due to a power outage or other
event. When activated, the Temp Alarm light will
illuminate.
If the freezer or fresh food temperatures
have
exceeded these limits, the display will alternately
show
the current compartment
temperatures
and the highest
compartment
temperatures
reached when the power
was out. An audible alarm will sound repeatedly.
Press the Temp Alarm
pad once to stop the audible
alarm. The Temp Alarm light will continue
to flash and
the temperatures
will alternate until the temperatures
have stabilized.
To turn off Temp Alarm, press and hold the Temp
Alarm
pad for three (3) seconds.
The indicator
light
will go off.
o
Door Alarm
The Door Alarm will alert you when one of the
doors has been left open for five continuous
minutes.
When this happens, an audible alarm will sound every
few seconds until the door is closed OR press the
Door Alarm
pad to deactivate the feature.
Rapid Cool
When activated,
Rapid Cool causes the fresh
food and freezer temperatures
to drop to the
minimum
settings on the control.
This cools down the
refrigerator
and freezer after extended door openings
or when loading the refrigerator
or freezer with warm
food.
Important:
When the Rapid Cool feature is in
operation,
the _^_ and _.,,_pads for the refrigerator
and freezer controls will not operate.
To activate, press the Rapid Cool pad. Rapid Cool will
deactivate automatically
after 12 hours, OR press the
Rapid Cool pad to deactivate the feature.
User Preferences
Access the User Preferences
menu to:
• Change the temperature
display from °F to °C.
• Enable or disable audible alarms.
To access the User Preferences
menu, press and hold
the Door Alarm
pad for three (3) seconds.
When in
the User Preferences
mode, a short title for the feature
will appear in the Freezer temperature
display and the
feature status will appear in the Fresh Food display.
1. Use the Freezer
_
and (_
control to scroll
through
the features.
2. When the desired feature is displayed,
use the
Refrigerator
_^_ and _v_ control to change the
status.
•
3. When changes are complete, press the Door
_
Alarm
pad for three (3) seconds OR close the
Fresh Food door.
Temperature
Display
(F_C)
Change the display to show temperatures
in degrees
Fahrenheit or degrees Celsius.
Alarm
(AL)
When the Alarm mode is OFE all audible alarms will
be disabled
until the feature is turned on.
Auto Light Level Selection
(LL)
This setting adjusts the light level at which the
dispenser
light will illuminate when the sensor detects
that the light levels in the room are low. Setting 1 is
the darkest light level setting, setting 9 is the lightest
light level setting.
Important:
The Auto Light (select
models) must be activated on the ice and water
dispenser control to take advantage
of this option.
Sabbath
Mode
(SAB)
When the Sabbath Mode is ON, all control lights and
the night light will be disabled
until the feature is
turned OFE This feature does not disable the interior
lights.
Press ANY pad to restore the control lights.
Warm Cabinet Surfaces
At times, the front of the refrigerator
cabinet may be
warm to the touch.
This is a normal occurrence
that
helps prevent moisture from condensing
on the
cabinet.
This condition
will be more noticeable when
the refrigerator
is first started, during hot weather and
after excessive or lengthy door openings.
• Adjust the light level at which the Dispenser Auto
Light will illuminate
(when this feature is activated on
the ice and water dispenser).
• Activate the Sabbath Mode.
14
Publicidad
