Publicidad
Idiomas disponibles
Idiomas disponibles
Iceand Water
Dispenser Features
Main
Dispenser
Pad
Front Fill
Removable
Tray
Dispenser Light
A light activates within the dispenser
area at full power
when dispensing
ice or water with the main dispenser
pad.
Dispenser
Pad
The Dispenser
Pad is located on the back wall of the
dispensing
area. When the dispenser
pad is pressed,
the selection chosen on the dispenser control panel
will dispense.
Removable
Tray
The Removable Tray at the bottom of the dispenser
area is designed to collect small spills and may be
easily removed for cleaning
and emptying
purposes.
Important:
Removable tray does not drain. Do not
allow tray to overflow. If it does, remove tray and wipe
up overflow.
Water Dispenser Operation
To avoid personal
injury or property damage,
observe the following:
• Do not put fingers, hands or any foreign object
into dispenser opening.
• Do not use sharp objects to break ice.
• Do not dispense ice directly
into thin glass, fine
china or delicate crystal.
Note:
During initial use of water dispenser, there
will be a one- to two-minute
delay while water tank
fills before water dispenses. Discard first 10-15
glasses of water after initially connecting
refrigerator
to household water supply and after extended
periods of nonuse.
To Use Dispenser
Pad:
• Choose water selection from dispenser control panel.
Press a sturdy, wide-mouthed
container
against
dispenser pad. When dispensing
crushed ice, hold
container
as close to chute as possible to reduce
spraying.
Release pressure on dispenser pad to stop water
dispensing.
A small amount of water may continue to
dispense and collect in dispenser tray. Large spills
should be wiped dry.
Dispenser Control
Ice Dispenser Operation
To Dispense
Ice and Water:
" Select Water, Crush °r Cube
_
c_:_
c_:b-"
_
ice mode by pushing the
corresponding
button on the
dispenser control panel. A green light above button
indicates
mode selection.
Press container
against dispenser pad.
When dispensing
crushed ice, hold
container
as close to chute as possible to
reduce spraying.
Front Fill Button (select
models)
The Front Fill Button works independently
of the
dispenser controls, providing
an up-front
alternative
to
the dispenser pad for dispensing
water. This feature is
convenient
for filling large items that will not fit into
the dispenser area (i.e. sport bottles, pitchers, large
pans, coffee pots). This feature allows added
convenience
of dispensing
ice and water
simultaneously.
To use, choose ice mode from
dispenser control panel. Press container
against
dispenser pad while pressing the Front Fill button.
Notes:
• Mode may not be changed while ice dispenser is
in operation.
• If dispenser is active for more than five minutes,
an automatic
lock out sensor will shut down
power to dispenser area. See Dispenser Lock,
pg. 20, for unlocking
information.
19
Publicidad
