Bosch HBE5451UC Manual De Uso Y Cuidado página 15

Troubleshooting
If you encounter a problem, it often will merely be
something minor. Before you call customer service,
consider the suggestions and instructions below:
• , WARNING
RISK OF ELECTRIC SHOCK
Incorrect repairs are dangerous.Repairs must only
be carried out by one of our trained customer
service technicians.
Incorrect repairs to your appliance may present
considerable risks for the user.
Fault Possible cause
The appliance does not work. Faulty fuse
The oven cannot be switched
off.
The clock display flashes.
The oven does not heat.
Power failure
Electronics are
faulty
Power failure
Faulty fuse
Function selector
not set
Noteslremedy
Look in the fuse box and check that the circuit breaker for the
range is in working order.
Check whether the kitchen light works.
Switch off the circuit breaker. Call customer service.
Reset the clock.
Check the fuse and replace if necessary.
Set the function selector.
The door glass is broken. Switch off the appliance. Call customer service.
Fruit juice or albumen stains Moist cake or meat Harmless change in the enamel, cannot be removed.
on enameled surfaces, juices
The oven stops operating in Problem with ther- 1. Set function selector to Off position.
the middle of a program, and
the cooling fan continues to
run at high speed even when
function selector is set to Off
position. The buzzer sounds
intermittently and the control
lamp is flashing.
mostat
.
3.
The cooling fan continues to run at high speed.
Wait for 10 seconds.
Set function selector to a new position.
If the error occurs again when setting a new function: Dis-
connect the oven from power supply, then reconnect power
supply.
If the error occurs again after reconnecting power supply:
Call customer service.
15