Plug-In Receiver; External Antenna; Electric Lock - DIMOEL MOOV-B300 120V Manual Del Usuario

PLUG-IN RECEIVER

The control unit is suitable for plugging-in an MR1
series receiver with high sensitivity super-heterodyne
architecture.
PLEASE NOTE: Disconnect the power to the
control unit before performing the following
operations. Pay the utmost attention to the
direction of insertion of plug-in modules.
The MR1 receiver module has 4 channels, each with
an associated command on the CITY11 control unit:
• CHANNEL 1 START
• CHANNEL 2 PEDESTRIAN START
• CHANNEL 3 STOP
• CHANNEL 4 COURTESY LIGHTS
PLEASE NOTE:
Read the instructions supplied with the MR1
receiver thoroughly for details on programming the
4 channels and the operational logic.

EXTERNAL ANTENNA

It is recommended the external antenna be used in
order to guarantee maximum radio capacity.
Connect the antenna hot pole to terminal A1 of the
control unit and the braiding to terminal A2.

ELECTRIC LOCK

A 12V electric lock can be mounted on the gate to
ensure a good closure of the shutters.
The electric lock is activated for a fixed time of
1.5 seconds.
The lock advance time is adjustable from 0.2 to
0.5 seconds (dip-switch 1)
Connect the cables of the electric lock between
terminals L10 and L11 of the control unit.
19