Publicidad
Idiomas disponibles
Idiomas disponibles
To assemble the belt eyelet
Use the belt eyelet to attach the product to a belt or
harness.
Introduction
WARNING:
safety chapter before you use the product.
To do a function check before you use
the product
1. Make sure that the chain brake operates correctly
and that it is not damaged.
2. Make sure that the throttle trigger lockout operates
correctly and that it is not damaged.
3. Make sure that the start/stop switch operates
correctly and that it is not damaged.
4. Make sure that there is no oil on the handles.
5. Make sure that the vibration damping system
operates correctly and that it is not damaged.
6. Make sure that the muffler is correctly attached and
that it is not damaged.
7. Make sure that all parts are correctly attached and
not damaged or missing.
8. Make sure that the chain catcher is correctly
attached.
9. Make sure that the saw chain tension is correct.
2
3
4
5
7
6
Connectivity
This product is prepared for connectivity and has a
location for installation of a Husqvarna Connectivity
Device. When the Husqvarna connectivity device is
installed, the product has wireless technology and can
use Husqvarna Fleet Services
devices. This enables more functions.
1792 - 007 -
Operation
Read and understand the
1
9
8
™
to connect to mobile
•
To assemble the belt eyelet, speak to your servicing
dealer.
To install the Husqvarna connectivity device
Do the steps that follow to install the Husqvarna
connectivity device. For more information about
the Husqvarna connectivity device, refer to
www.husqvarna.com.
1. Remove the screw and open the plastic cover.
2. Remove the connector.
3. Install the Husqvarna connectivity device.
11
Publicidad
