Publicidad
Idiomas disponibles
Idiomas disponibles
2. Push the air purge bulb about 6 times or until fuel
starts to fill the bulb. It is not necessary to fill the air
purge bulb completely.
3. Set the start lever to the start position.
4. Continue to
To start the product on page 15 for
more instructions.
To start the product
WARNING:
a stable position when you start the product.
WARNING:
idle speed, speak to your servicing dealer
and do not use the product.
1. Put the product on the ground.
2. Put your left hand on the front handle.
3. Put your knee on the rear part of the top handle.
1792 - 007 -
You must keep your feet in
If the saw chain rotates at
4. Pull the starter rope handle slowly with your right
hand until you feel resistance.
WARNING:
cord around your hand.
CAUTION:
rope to full extension and do not let go of
the starter rope handle.
5. Pull the starter rope handle quickly and with force
until the engine starts.
6. Quickly disengage the throttle trigger lockout to set
the product to idle speed.
7. Move the front hand guard rearward to disengage
the chain brake.
8. Use the product.
To start the product in the tree
Note:
Make sure that you have sufficient fuel before
you start the product.
Do not twist the starter
Do not pull the starter
15
Publicidad
