Washing The Espresso Hydraulic Circuit; Regulation Of The Cup/Glass Support Rack For The; Preparation Of Espresso; Selecting The Brewer - LAVAZZA LB 1200 GALACTICA Instrucciones De Uso

E N
WASHING THE ESPRESSO HYDRAULIC
CIRCUIT
When the machine is used for the first time or af-
ter a prolonged period of inactivity, it will require
priming to refill the hydraulic circuit. To refill the
hydraulic circuit start the AUTOMATIC CLEANING
OF THE ESPRESSO GROUPHEAD (see
CLEANING OF THE ESPRESSO UNIT"
REGULATION OF THE CUP/GLASS
SUPPORT RACK FOR THE PREPARATION
OF ESPRESSO
The cup support rack has two positions for
small and larger cups.
Adjusting the cup support rack:
For espresso cups [A]: position the cup sup-
port rack in the upper position.
Rest the cup on the grid.
For large cups [B]: Lift the cup rest grid to
remove it and fit it into the lower position. Place
the cup on the grid.
A

BREWING A FREE ESPRESSO DOSE

Position the large/small cup (see
1
OF THE CUP/GLASS SUPPORT RACK
capsule-loading lever and insert a capsule.
20

PRIMING THE MACHINE

"AUTOMATIC
25
).
B

PREPARING ESPRESSO

REGULATION
), raise the

SELECTING THE BREWER

The machine has two brewing spout: one at the
centre [A] and one at the side [B].
A
When the three keys (espresso)
left-hand panel are pressed, brewing will occur by
means of the spout [A].
When the four keys (other drinks)
the right-hand panel are pressed, brewing will occur
by means of the spout [B].
I
er support must be completely retracted.
Never place your fingers or any other object in-
side the capsule-insertion space.
Insert only Lavazza BLUE capsules.
Lower the capsule-loading lever completely.
2
B
on the
on
-