SHERCO 450 SEF 2020 Manual Del Propietário página 123

450/500 SEF/R
Electrical system maintenance (continued)
REINSTALLING THE HEADLIGHT HOUSING
3
REPLACING THE HEADLIGHT BULB OR THE PILOT LAMP
1
120
2
1
3
2
Connect the electrical connector.
Engage the light plate, ensuring that the holes in
1
the plate are in place
Place all of the brake hoses / cables in the inte-
rior of meter upper guide
Attach the rubber fastners.
Check the setting of headlight beam. (
Remove the headlight housing assembly
( p.119)
☛
Remove the protective rubber
Turn the socket a quarter turn counterclockwise
to remove it from the headlight assembly.
Gently press the bulb in while turning it counter-
clockwise and remove it from the socket.
2
Install a new bulb
Headlight bulb S2
Reinstall the socket with the bulb in the headlight
assembly by turning it in a clockwise direction.
Reinstall the protective rubber.
To replace the pilot light
socket from the reflector
Pilot light W5W
Reinstall the headlight housing assembly
( p.120)
☛
2
.
3
.
p.121)
☛
1
.
12V 35/35W S2
3
simply remove the
2
.
12V 5W