Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
Assemble the unit and plug the unit directly into a 120V AC electrical outlet.
NOTICE: The button functions on the remote are identical to the corresponding button
functions on the unit.
STARTING UNIT AND SELECTING HEAT MODE
UNIT
Turn the heater on or off by pressing the ON/OFF icon
NOTE: Once power is OFF, heating element will stop working. Fan will continue
to run for 3 minutes to cool off the heating element.
Press the Mode icon to toggle between the heat modes High, Low or ECO:
High Mode: Heater runs at 1500W
Low Mode: Heater runs at 750W
ECO Mode: Heater runs at low/high wattage based on the temperature difference
between set temperature and room temperature.
SELECTING DESIRED TEMPERATURE
UNIT
59
60
86
15
16
30
˚C
25
77
F
NOTICE: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature.
Wall Mounted Forced Air Electric Heater
Press the Up/Down arrows to adjust unit to the desired room
temperature.
Select temperature from 59˚F to 86˚F or from 15˚C to 30˚C.
NOTE: Once you have chosen the desired temperature, the
˚F
heater will remain on until room temperature increases to the set
temperature on the LED display and then it will turn off, but the
˚C
fan will remain on for 3 minutes. The heater will then cycle ON
and OFF to maintain set room temperature.
Press and hold mode icon on unit for 3 seconds to toggle between �C/�F.
When the temperature is set in Fahrenheit, the Fahrenheit
C
indicator LED will light.
˚F
When the temperature is set in Celsius, the Celsius
indicator LED will light.
FUNCTION
FUNCTION
Modes
6
Installation Instructions and Owner's Manual
Publicidad
