Publicidad
Idiomas disponibles
Idiomas disponibles
NOTICE: When the heat function is used for the first time, a slight odor may be present. This
is normal and should not occur again unless the heater is not used for an extended period of
time.
SETTING CHILD LOCK
NOTICE: The Child Lock can help avoid the heater from being accidentally engaged by children.
The locking mechanism can be set in both the ON and OFF modes. The Child Lock must be reset
if unit powers off.
UNIT
SETTING DISPLAY BRIGHTNESS
UNIT
SETTING POWER OFF TIMER FUNCTION
NOTICE: The Power OFF Timer function will allow for the heater to power OFF after a certain
set time, and can only be set while the heater is in the ON mode. The Power Off Timer must be
reset if unit powers off.
UNIT
01
02
Wall Mounted Forced Air Electric Heater
TO LOCK: Press the light bulb icon for 3 seconds. Locking is
complete when a beep is heard and lock indicator is illuminated.
When locked, the functions of the control panel and remote
CANNOT be used.
TO UNLOCK: Press the light bulb icon for 3 seconds. Unlocking is
complete when a beep is heard. The control panel and remote
control will become functional.
Press the light bulb icon on the unit to set the LED brightness to
bright, dim or off.
Note: When the LED display light is off, only the power on/off
icon is lit. Other icons can't be used. To activate other icons, press
the light bulb icon again.
1. Turn the heater ON.
2. Press the Timer icon.
LED display changes from the "temperature" to the "hours"
option for the timer. Hour options for the timer are 0 to 12 hours
12
(in 1 hour increments).
3. Continue to press the timer icon to change the number of
hours the heater will run before powering itself OFF.
FUNCTION
FUNCTION
FUNCTION
7
Installation Instructions and Owner's Manual
Publicidad
