Casada braintronics POLLUX Manual De Instrucciones página 50

Moving the Massage Chair
Put the backrest in the upright position.
•
Switch off the mains switch and disconnect the mains plug from the socket.
•
Push the backrest down with two people and lift the armchair on its front by grasping the holder
•
located at the front bottom of the armrest and roll the armchair on its castors to the desired location
(see sketch).
Roll the armchair on its castors to the desired location.
•
CAUTION
Connecting the power supply
Connect this appliance to a properly earthed socket.
•
Activate the main switch at the rear of the massage chair.
•
CAUTION
Connect the power cable to the product power connector port located at the power box of the prod-
•
uct. (Check the illustration below).
50
Do not move the chair when a person is in it.
•
For transport, do not lift the chair by the footrest or armrest, hold the chassis and
•
stabilise the backrest (have 4 or more people transport the chair).
Please verify that there is no damage to the supply cord before switching on the
•
massage chair.
Please verify that the main power switch is turned off before connecting to power.
•