Aiwa AV-D37 Manual De Instrucciones página 11

DSP SURROUND
TUNING
DSP UP,DOWN
MULTI JOG
( Q center Sar, 3
HU{|vouume
TASS
%
ag
Selected mode
To cancel the selected mode
To select with the remote control
1 Press the DSP button.
or turn the MULTI JOG within four seconds.
Note that the surround speakers volume and balance of the
5.1CH and Dolby Pro Logic modes are also changed.
To adjust the elements of the DSP surround
You can change or adjust the elements of the DSP surround
according to your listening area and your preference.
surround effect.
TIME15mS [Delay Time setting]
15 mS <— 20 mS < 25mS <— 30mS — 50mS
F-B -9dB [Echo (feedback) level setting]
The echo level
is initially set to -9dB, and can be changed
between -3dB and MIN in 3cB steps as follows:
INPUT L-R [Surround effect setting]
Select one of the surround effect mode
INPUT L-R: The surround effect increases, especially on the
center. This is the initial mode.
INPUT L+R: The surround effect increases, especially on the
outside.
[NOTE |
¢ The DSP system is automatically canceled:
- when the Dolby Pro Logic is turned on
- when the 5.1CH function is selected
* The DSP system cannot be turned on:
- while the 5.1CH function is selected
- while headphones are plugged in
ENGLISH 10