Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE OPERATIO
MULTI JOG
Function indicators
PHONES
FRONT SPEAKERS A,B
To turn the unit on
Press the POWER button.
Operation is possible after four seconds. The VOL (volume) level
or function name is displayed one after the other for the first four
seconds.
The selected function indicator lights up in red.
To change the brightness level of the display
1 Press the ECO button repeatedly until
"DIM MODE"
is
displayed.
2 Within 4 seconds, press.the ENTER button.
3. Within 4 seconds, turn the MULTI JOG to select the dimmer
mode as below.
The mode will be automatically set after 4 seconds.
It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
ae
<——>
DIMMER 1 <+—-> DIMMER 2 <a]
DIM-OFF:
The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1. The function indicator turns off.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (@6.3 mm). Be sure to set the FRONT SPEAKERS A andB
buttons to SLOFF. Otherwise sound is output from the speakers.
Cou
The 5.1 CH function, Dolby Pro Logic or DSP system
is
automatically canceled when the headphones are plugged in.
7 ENGLISH
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button
to m= ON.
:
To use speaker system B: Set the FRONT SPEAKERS B button
to mON.
To use both speaker systems: Set both the buttons to = ON.
Set the button(s) to LOFF to turn off the speaker system(s).
[NOTE
As the front speaker systems A and B are connected in series:
- The sound will decrease slightly when using
both speaker
systems
- No sound can be heard if the FRONT SPEAKERS A and B
buttons are set to mON
when only one speaker system is
connected
To turn the unit off, press the POWER button. ~
POWER ECONOMIZING (ECO) MODE
1
3 2
Setting this unit to the ECO mode reduces power consumption
as below.
Initial setting of the ECO mode is ON.
* When the current time is set, the clock display disappears
immediately.
* While the power is off, all the display lights turn off, and only
the indicator on the left side of the display window lights in red.
To cancel the ECO mode
1 Press the ECO button to display ECO MODE while the unit is
turned on.
;
2 Within 4 seconds, press the ENTER button.
3 Within 4 seconds, turn the MULTI JOG to select ECO OFF.
The mode will be automatically set after 4 seconds.
It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
Publicidad
