Descargar Imprimir esta página

Aiwa AV-D37 Manual De Instrucciones página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
OTHER FUNCTION OF RDS CODES
Auto GEQ function
The equalization curve is switched automatically to match the
music program type of an RDS station.
Press the AG button.
The AG indicator lights up.
To cancel, press it again.
GEQ matching PTY:
PTY
POP M
ROCK M
ROCK
LIGHT M
CLASSICS
JAZZ
COUNTRY
CLASSIC
JAZZ
POP
NATION M
POP
OLDIES
POP
FOLK M
JAZZ
EASY M
BGM
Others
off
The selcected GEQ can be changed to suit your preference.
During this time, the Auto GEQ function is canceled.
Clock-time (*®CT)
:
The CT function provides the unit with information about the local
time. The CT function works whenever a CT station is received.
If you have not set the clock (the clock flashes on the
display)
The current time can be set automatically by tuning in to an RDS
station.
If no RDS station is preset, tune in to an RDS(CT) station
manually by pressing the "A or \/ button.
If the clock does not agree with the broadcast time
RDS signal will update the clock time every hour on the hour.
17 ENGLISH
*5 Program type identification (PTY)
PTY allows selection of listening by one of 30 or more
program types rather than by a station.
*6 Enhanced other networks information (EON)
EON information gives the receiver a cross reference
to other stations and allows the receiver to switch from
the currently tuned station to another RDS station.
*' Traffic program identification (TP)
This is a code which informs the receiver that a tuned
station regularly broadcasts traffic information.
*8 Clock-time (CT)
CT function provides an accurate clock signal which is
self-adjusting to time zones and seasonal time changes.
To change the MW tuning interval
The default setting of the MW tuning interval is 9 KHz/step.
If you use the unit in an area where the frequency allocation
system is 10 kHz/step, change the tuning interval as follows.
Hold down the VIDEO/5.1CH/BAND
button and press the
POWER button.
'
To reset the interval, repeat this procedure.
|NOTE.
When the MW tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.

Publicidad

loading