Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE CLOCK
VIDEO/5.1CH/BAND
1 Press the ENTER button.
The display becomes a little brighter.
3 Press the ENTER button.
The clock starts from 00 seconds.
Cod
To correct the current time
Press the POWER button to turn the unit off. Carry out steps 1
to 3 above.
To display the current time
To switch to the 24-hour standard
If the clock display flashes while the power is off
This is caused by a power interruption. The current time needs
to be reset.
:
If power is interrupted for more than approximately 24 hours, all
settings stored in memory after purchase need to be reset.
SETTING THE SLEEP TIMER
TUNING UP, DOWN
The receiver can be automatically turned off at a specified time.
Press the SLEEP button while pressing the SHIFT button
on the remote control.
|
sua wooreR )
(center
Lei
eee
=
eas:
SLEEP
:
:
<
>
T-BASS.
%
ws
The unit will be turned off after about 60 minutes.
To specify the time until the power is turned off
Within 4 seconds after the above, press the TUNING DOWN or
UP button repeatedly while pressing the SHIFT button.
You can change the time between 5 and 240 minutes in 5-minute
steps.
(Q center
Kia
s
anak
T-BASS
Ea
igs
Specified time
To check the time remaining until the power is turned off
Press the SLEEP button once while pressing the SHIFT button.
The remaining time is displayed for four seconds.
To cancel the sleep timer
Press the SLEEP button twice while pressing the SHIFT button
so that "SLEEPoFF" appears on the, display.
ENGLISH 20
Publicidad
