Korg M PS-10 Guia De Inicio Rapido página 14

MPS-10
- Sampler
Sampler
On the MPS-10, you can sample the sounds of the built-in sound generator as well as the external input audio sig-
nals from the LINE IN and MIC IN jacks, and assign them to the pads.
See the Owner's Manual (HTML) for how to sample and assign audio to the pads.
Utilities
In UTILITY mode, you can configure the settings for the pad triggers, the audio input/output, metronome, MIDI,
display and so on. You can also create set lists, import/export data and more.
This mode also offers options for calibrating the pedals, formatting a USB flash drive, restoring the system settings
and updating the system.
For more information about UTILITY mode, refer to the Owner's Manual (HTML).
Main specifications
No. of KITs
Playable data formats
Display
Operating temperature
Power supply
Dimensions
(W × D × H)
Weight
Included items
For the following terminals, use a cable of 3 m or less to prevent malfunction.
PHONES OUT jack, MIC IN jack, LINE IN jack, FOOT SW 1, 2 jacks, EXPRESSION PEDAL jack, MIDI OUT
connector, TO PC port
Specifications and appearance are subject to change without notice for improvement.
200 (including user KITs)
WAV, 44.1 kHz/48 kHz, 16-bit (up to 60 minutes long)
AIFF, 44.1 kHz/48 kHz, 16-bit (up to 60 minutes long)
320 × 240 dots (backlit color LCD)
0 to +40°C (avoid condensation)
AC adapter (DC 9 V)
424 × 264 × 75 mm/16.69" × 10.39" × 2.95"
2.3 kg /5.07 lb
AC adapter, Quick Start Guide (this document)
En-13