Korg M PS-10 Guia De Inicio Rapido página 4

MPS-10
- Introduction
Introduction
Thank you for purchasing the Korg MPS-10 Drum, Percussion & Sampler Pad.
To help you get the most out of your purchase, please read this manual carefully.
Aside from this document, an Owner's Manual is also available in HTML format, which explains how to use the
functions of this unit in detail. See the Owner's Manual (HTML) on the KORG website.
Main features
Rich expressiveness and a wide variety of presets
The MPS-10 features a wide variety of presets to cover many different genres, whose sounds change in diverse
ways depending on how you play them. This unit also includes a large selection of loop sounds, extending its use-
fulness beyond that of a simple percussion sound source.
You can switch between sounds without interruption, making the MPS-10 a formidable choice for live perfor-
mance.
Continuous control pads
With continuous control pads (CC pads: the four pads located at the top of the panel), you can control parameters
such as the built-in effects in real time, according to where you strike the pads.
Four-track looper
The MPS-10 features a four-track looper that lets you record not only the sound from this unit, but also audio
from external input as well.
As each track can be recorded and played back in sync, and this unit also features a built-in effects unit for the
looper, you can play the MPS-10 like a DJ.
Sampler
With the sampler, you can sample both the sound from this unit and from an external input at the same time. You
can play the sampled sounds right away on the pads of the MPS-10. You can also edit the data that you sampled on
this unit.
SET LIST function
You can reorder the KITs in the order you like. You can register up to eight set lists.
Connecting to a computer
The MPS-10 can transmit and receive MIDI messages and USB audio signals to/from a computer that's connected
via USB.
USB flash drive support
Use a USB flash drive to import sample data into this unit that was created on a different device, or to back up the
settings of the MPS-10.
En-3