Korg M PS-10 Guia De Inicio Rapido página 8

MPS-10
- Turning the power on/of f
Turning the power on/off
Turning the power on
1
Turn the MAIN VOL. and PHONES knobs on this unit all the way down (counterclockwise) to minimize the
volume.
Make sure that the volume on any external devices that are connected (such as mixers or powered monitor
speakers) is turned down and that the power is turned off.
2
Press the (Power) button on the MPS-10.
After the opening screen is shown on the display, the KIT name is shown.
Tip: The name of the KIT last selected before the power was turned off is shown.
3
Turn on the external output devices connected to this unit.
Turn on the power of the external output devices that are connected to the MPS-10's output jacks (MAIN
OUT L (MONO), R), such as powered monitor speakers or mixers.
4
Adjust the volume to the optimal level.
Adjust the MAIN VOL. knob on this unit, and set the volume on your external output devices to a suitable
level.
Turning the power off
1
Turn the volume all the way down on any external output devices that are connected.
Lower the volume on the external output devices connected to this instrument, and then turn off the power of
these devices.
Turn the MAIN VOL. and PHONES knobs on this unit all the way down (counterclockwise) to minimize the
volume.
2
Keep holding the power button on this unit down until the "POWER OFF" popup message is shown in the
display.
Once the display goes dark, the power turns off.
Do not unplug the AC adapter before the display goes dark. Doing so may cause a malfunction.
Auto power-off function
The MPS-10 has an auto power-off function that automatically turns off the power if the pads have not been
played or if the front panel buttons and controls have not been used for a certain length of time.
Auto power-off can be disabled. See the Owner's Manual (HTML) for how to do this.
En-7