Publicidad
Idiomas disponibles
Idiomas disponibles
Product-specific safety instructions:
Intended use:
CAUTION!
described in this instruction manual. The protective effect of the device may be
impaired if the device is not used as intended. The BarScreenSensor must not be
used for medical purposes under any circumstances.
This device is designed for the use in (precious) metal testing and is suitable for ultrasonic
measurements of metals. Goldanalytix is not liable for damage resulting from improper
use.
The device may be operated in continuous mode.
Repair and modifications:
CAUTION!
dismantle the device or attempt any modifications or repairs. If you encounter any
problems with the BarScreenSensor, please contact Goldanalytix (for contact
details, see page 26).
Repairs by unauthorized persons may endanger the user and invalidate the warranty.
Repairs may only be carried out by Goldanalytix itself.
Operating conditions:
The device is intended for indoor use only.
Never use the device near explosive gases, vapors, dust or in a damp and wet
environment. Protect the device from moisture and humidity. Make sure that no liquid
gets inside the device and wipe off spilled liquids immediately.
Please operate the device at room temperature and not in direct proximity of heat
sources (e.g., next to the fan output of a laptop). Avoid temperature changes and a
temperature of the hardware and the test object of more than 60 °C.
Do not operate the device near sensitive technical devices (e.g., pacemakers, hearing
aids, etc.) to avoid personal danger and damage to the technical devices.
Store the device at room temperature in a dry environment. Avoid storage in an
environment with high humidity.
Cleaning and maintenance:
Please replace the batteries when the low battery indicator appears on the display.
Proceed as follows: Press the On/Off button to switch off the device. Open the battery
compartment on the back of the device. Replace the empty batteries with new batteries
of the same type, making sure that the polarity is correct when inserting them.
Do not use any solvents or alcohols to clean the device, which could damage the casing
and LCD display. Clean the instrument with a damp cloth.
18
Do not use the device for any purposes other than the intended use
To avoid damage to the device and/or personal injury, do not
Publicidad
