Installing the unit
• Place the pump casing horizontally on a firm, mud-free surface. Ensure stable positioning of
the pump casing.
• Only operate the pumps when they are fully submerged.
• Position the control box and power pack so that they are protected against direct sunlight.
The distance from the water must be at least 2 m.
• If the ground is soft, the control box can be anchored to the ground with a ground stake.
• As an alternative the control box can be fastened e.g. to a plate using suitable screw connect-
ors. (Screws not included.)
24
WTO0006
WTO0005
WTO0007