Oase WATER TRIO Instrucciones De Uso página 28

Teach-in manual transmitter
The supplied hand-held transmitter is already calibrated for the control box. You can register up
to 10 hand-held transmitters on the control box.
To register another hand-held transmitter, proceed as follows:

You can only log out all hand-held transmitters registered on the control box at the same
time, not individual transmitters. To log out all hand-held transmitters, press the calibration
button for approx. 5 seconds.
Maintenance and cleaning
NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
 If possible, clean the unit with clear water and a soft brush or a sponge; remove stubborn dirt
with the aid of the recommended cleaning agents.
Cleaning the device

Clean the unit as required but at least twiceper year.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
• After cleaning, thoroughly rinse all parts in clean water.
28
Register hand-held transmitter:
1. Press the calibration button on the control
box with a pointed object (pen, unbent paper
clip, etc.) for approx. 1 second.
The control box is now in calibration mode for
3 seconds.
2. Press any button on the hand-held transmit-
ter for approx. 1 seconds within those 3 sec-
onds.
The control box can now be operated with
the new hand-held transmitter.