Operating Positions; Working With Kneading Hooks, Beaters And Whisks - Silvercrest SKM 550 EDS A1 Instrucciones De Uso

Operating positions

Important: Only operate the appliance when
accessories are attached and in the operating
positions shown in this table. NEVER operate the
appliance without ingredients.
Position
1
2
3
Positioning of the mixing bowl
4
Utilisation of kneading hooks,
beaters and whisks
Insertion of large amounts to
5
be processed
Working with kneading hooks,
beaters and whisks
Note: The appliance may only be used when
the drive openings not being utilised are
covered with drive protection lids.
Accessories
To prepare the appliance for work with kneading
q
hooks , beaters
follows:
• Press the unlocking button
h
arm into operating position 4 (see chapter
„Operating positions") (Fig.
• Insert the mixing bowl
y
bowl must engage in the recesses
appliance.
• Press the unlocking button
h
arm into operating position 1 (see chapter
„Operating positions") (Fig.
• Place and hold turn switch
the drive motor
position (Fig.
move it is already at the park position.
• Press the unlocking button
h
arm into operating position 4 (see chapter
„Operating positions") (Fig.
• Depending on the task to be performed, insert
the kneading hooks
so that they firmly engage in the drive
Note: The kneading hooks
pastry deflector. Turn the pastry deflector until the
kneading hooks
• Place the ingredients to be processed into the
mixing bowl y
Note: Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities".
• Press the unlocking button
h
swivel arm
(see chapter "Operating positions") (Fig.
but do not allow it to engage.
• Slide the lid onto the mixing bowl
- 34 -
w e
and whisk , proceed as
f and bring the swivel
).
y . The base of the mixing
f and bring the swivel
).
g
in position P, until
j
remains stationary in the park
). Should the drive motor not
f
and bring the swivel
).
q w
, beaters or whisks
q
are fitted with a
q
can engage (Fig.
.
f down and bring the
to just before operating position 1
y
k
on the
e
j
motor.
).
),
.