Oase AquaMax Eco Expert 20000/12V Puesta En Marcha página 15

1 Inlet (suction side)
• With filter cage (3) for submerged installation.
• With hose sleeve for dry installation
2 Outlet (pressure side)
• Connection of the return line into the pond (e.g. via a water course).
• The unit can be converted so that the outlet points up.
3 Filter cage
4 Foot
• With installation holes for firm installation on ground if required.
5 Switching power pack with power cable
• Pump power supply
6 Switch on/off Seasonal Flow Control (SFC).
• The SFC function optimises the pump speed and with it the water volume and pumping head
based on the water temperature.
7 Control system connection
• The control system makes it possible to regulate the pump power.
Hose sleeve ∅ 50 mm
• Without the control system, the pump runs permanently at full power.
Hose sleeve ∅ 38 mm
8
9
Hose sleeve ∅ 50 mm or ∅ 63 mm
10 Hose clips for fastening hoses on the hose sleeves.
11
Installation variants
 A
• Variant (a): Submerged pump installation
– The pump is positioned in the pond or basin.
– Water flow via the filter cage.
• Variant (b): Dry pump installation
– The pump is installed without the filter cage outside of the pond or basin but lower than the
water level.
– Water flow via a satellite filter or skimmer.
EN
15