Kohler Oblo K-123B16-SANA-CP Instrucciones De Instalación página 8

4. Install the Spout
Position the keyholes on the spout over the screwheads on the mounting bracket.
Loosen the screws if needed.
Align the spout by rotating clockwise.
Tighten the screws to secure the spout to the mounting bracket.
Remove the setscrew from the wall plate.
Slide the wall plate over the spout until flush with the wall. Take care not to
damage the finish.
Secure the wall plate with the setscrew.
1561536-2-A
8 Kohler Co.