ENAR EBRO Serie Manual De Operación página 36

1 INTRODUCTION
Thank you for trusting the ENAR brand.
For the maximum performance of the equipment, we recommend read carefully the safety
recommendations, maintenance, and usage listed in this manual.
Defective parts should be replaced immediately to avoid major problems.
The effective longevity of the equipment will increase if the manual instructions are followed.
We will glad to help you with any comments or suggestions in reference to our equipment.
SAVE THESE INSTRUCTIONS—This manual contains important instructions for the machine models listed
below. These instructions must be followed during installation and maintenance of the pump (and battery, if
equipped).
en
Machine
identification
Serial number
(S/N)
Machine
documentation
2 EBRO
EBRO 2C, EBRO 3C, EBRO 3D
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Serial Number:
•
From this point forward, this document will refer to ENAR.
Keep a copy of the Operator's Manual with the machine at all times.
•
If you are missing any of these documents, please ENAR to order a replacement
or visit www.enar.es.
•
When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
WATER PUMP