Publicidad
Idiomas disponibles
Idiomas disponibles
6.4 CHANGING THE ENGINE OIL
Procedure
en
24
EBRO
EBRO 2C, EBRO 3C, EBRO 3D
Perform the procedure below to change the engine oil.
1.
Drain the oil while the engine is still warm.
2.
Remove the oil filter plug (a) and the drain plug (b) to drain the oil.
Note: In the interest of environmental protection, place a plastic sheet and a container
under the machine to collect any liquid that drains off. Dispose of this liquid in
accordance with environmental protection legislation.
3.
Install the drain plug.
4.
Fill the engine crankcase with the recommended oil up to the level of the lug
opening (c). See chapter Technical Data for oil quantity and type.
5.
Install the oil filler plug.
WATER PUMP
Publicidad
