Publicidad
Idiomas disponibles
Idiomas disponibles
MN010173A01-AA
Safety and Legal
Before using the battery charger, read all the instructions and cautionary markings on the charger and the
battery.
WARNING: Read these instructions carefully and save them for future reference.
●
To reduce the risk of damage to the power cord, pull the plug rather than the cord when
disconnecting power cord from the AC outlet or the charger.
●
To reduce the risk of fire or electric shock, avoid using an extension cord. If an extension cord must
be used, ensure that the cord size is 18 AWG for lengths of up to 6.5 feet (2 m), and 16 AWG for
lengths up to 9.8 feet (3 m).
●
To reduce the risk of fire, electric shock, or injury, do not operate the charger if it is broken or
damaged in any way. Take it to a qualified Motorola Solutions service representative.
●
To reduce the risk of fire or electric shock, do not disassemble the charger. It is not repairable and
replacement parts are not available.
●
To reduce the risk of electric shock, unplug the charger power adapter from the AC outlet before
attempting any maintenance or cleaning.
●
To reduce the risk of injury, charge only the rechargeable authorized batteries. Other batteries may
explode, causing personal injury and damage.
●
To reduce the risk of fire, electric shock, or injury, only use the accessories recommended by
Motorola Solutions.
●
Changes or modifications made to this device, not expressly approved by Motorola Solutions, could
void the authority of the user to operate this equipment.
Operational Safety Guidelines
●
This equipment is not suitable for outdoor use. Use only in dry locations and condition.
●
Maximum ambient temperature around the charger must not exceed 40 °C (104 °F).
●
Connect the charger only to an appropriate power cord listed in Motorola Solutions Authorized Power
Cord List.
●
The AC outlet to which the power cord is connected should be close and easily accessible.
●
Make sure the power cord is located where it will not be stepped on, tripped over, or subjected to water,
damage, or stress.
●
Connect the power cord only to an appropriately fused and wired AC outlet with the correct voltage, as
specified on the product.
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable. However, no
responsibility is assumed for inaccuracies.
Furthermore, Motorola Solutions reserves the right to change any products to improve readability, function, or
design. Motorola Solutions does not assume any liability arising out of the applications or use of any product
or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.
6
Publicidad
